Rental

Rent now all the vectors and payloads you need for your missions.

Below you will find our rental pool 

For third-party equipment, please contact us!

Find all the major brands of equipment, software sensors, etc.ADCPs, buoys, CTDs to ROVs, SVPs and time tagging units of:

Pilot Software

NaviSuite Kuda Pro

Bathymetry Software

NaviSuite Kuda Core

NaviSuite Kuda Pro + Processing

NaviSuite Ponto

Video enhancement software

Clarify 1.0 (Lolaark Vision)

The Clarifier 1.0 largely eliminates the effects of water turbidity and improves shapes for clearer, sharper underwater inspections, even in the most challenging conditions. The Clarifier works in real time. It increases visual clarity by a factor of more than 2, approximately 2-3*. It expands the visibility radius by at least 40% even in very turbid environments. Performance has been independently verified by ABS with a horizontal visibility of 7 inches. In less turbid environments, these improvement factors increase. The Clarifier cuts inspection time in half on average. It operates independently of navigation systems. Equipment required for external connection: 100 Mbps internet switch (connectivity instructions are listed in the manual). *The left panel above is original, taken from 21 inches away with human-eye visibility. The right panel shows the output of the Clarifier. Specifications: Works with UDP, RTP, RTSP cameras with high bitrate cameras. Suitable for Blue ROV cameras. Low latency (<1s). Résolution jusqu'à 1920x1080, à 30 fps. Fonctionne sur des PC portables ou des ordinateurs portables avec i7 12e génération 14 cœurs, 8 Go de RAM. Systèmes d'exploitation Windows 10 ou 11. Doit avoir NVDIA RTX 2060 ou 3050 ou supérieur, 6 Go de RAM.

Lasers/LiDARs

Laser Scalers (Spot X)

Laser Scalers (Spot X)

LASER SCALERS | 3mW Bright Green Laser Scaler Modules FEATURES: - Highly visible 3mW green lasers - 5VDC input - Available with mounts to fit various vehicles, including the Blue Robotics BR2 - Can be triggered with our Helm app, or with the BR2 ROV hand controller - Terminated with a Blue Robotics WetLink penetrator, or a Blue Trail Engineering Cobalt connector for quick connect/disconnect.

Oceanographic instruments (CTD and SVP)

ISA500

Altimeter ISA500 (Impact Subsea)

The ISA500 uses sonar technology to measure distances. Operating at 500kHz by default, the device uses a broadband composite transducer and electronics as well as an advanced digital acoustic engine. This combination allows the device to achieve long range and high accuracy. The device can operate at any frequency from 400 to 600kHz, ideal for different applications or to work in conjunction with other hydro-acoustic or sonar equipment. Range of over 120 meters Millimeter accuracy Optionally, heading, pitch and roll Software to view, record and configure Digital and analog interfaces Robust and compact housing Emulates any device Multi-echo output The ISA500 is an underwater altimeter and sounder for AUVs and ROVs offering exceptionally long range measurement capability of over 120 meters. In addition to these ranging capabilities, the device has an accuracy of 1mm, allowing for precise underwater distance measurements.

Modems, pingers and beacons

OceanStreamer System

OceanStreamer System - underwater video and communication (VirualDive)

HD Camera • Selfie Camera • Speaker • Microphone • Smartphone Case • 30m Cable (other lengths available) (connects to a Surface PC)

Multibeam echo sounders, sonar and subbottom equipment

Starfish 452F Side Scan Sonar (Blueprint Subsea)

The Starfish 452F side-scan sonar delivers high-definition images of the seabed thanks to its unique star shape and advanced CHIRP digital technology. Rigorous hydrodynamic studies have shown that the improved stability of the star shape results in superior image quality compared to other products on the market. The Starfish is compatible with any PC via USB. The intuitive Scanline software makes it easy to use for users of all skill levels. At our company, we are committed to offering the most advanced technology and services possible, and the Starfish is no exception.

Starfish 992h (Blueprint Subsea)

Hull-mounted side-scan sonar solution from Blueprint Subsea. Features: 1 MHz CHIRP operation, StarFish hull-mounted suitable for small coastal vessels. Simple installation and operation 1 MHz CHIRP operation Scanning coverage up to 70 m 0.3° horizontal beam width Simple and intuitive operator software Our rental unit is installed on the GPA Seabots USV.

Omniscan450FS (Cerulean Sonar)

The Omniscan 450 FS is ideally suited for forward-looking ROV applications. The transducer and electronics are housed in a single enclosure with an Ethernet and power interface. Two enclosure options are available for a depth of 100 m or 300 m. As the ROV or surface vessel moves, Cerulean SonarView "paints" the image of the scanned area of the seabed, providing excellent visibility in the darkest conditions. In the case of a surface vessel with GPS or an ROV with DVL, the scan is both translational and rotational. For underwater vehicles without positioning information, Omniscan's Dopper position tracking can be used to provide translational information in the beam direction. By using two Omniscan 450 FS units, one forward and one at 90 degrees to either side, full 2D motion tracking is available. This also enables position hold mode. 300m depth version The Omniscan is installed on one of our rental BlueROV2s.

Buoys, ROVs, ROTVs and USVs

V6 Expert (Fifish)

The Qysea Fifish V6 Expert ROV features six powerful motors and can capture 4K video and 12MP photos. It has a wide 166° field of view and LED lights for low-light conditions. The drone is highly maneuverable and has a battery life of up to six hours. It comes with a lightweight carrying case, a 100m cable, an SD card, a remote control, and a VR headset. Optional accessories include a gripper and a metal detector.

BlueROV2 fiber optic (1.2km) from ROV EXPERT

The BlueROV2 FO from ROV Expert is a high-performance underwater ROV, equipped with a 1200m FO cable. It features a front-facing HD camera, four lights providing up to 6000 lumens, and a modular chassis for easy expansion. The ROV has eight thrusters, configurable robust settings, and is designed for professional or scientific use. The patented T200 thrusters are vector-configured, allowing for a high thrust-to-weight ratio and omnidirectional motion control; sensitivity levels range from very low speed for precise control to high power for overcoming currents or heavy loads. The manual cable reel is equipped with a connector cable, and the camera angle can be controlled to look up or down. The BlueROV2 is powered by 2x18AH batteries and can dive to a depth of 400m. Optional additions include an acoustic camera and the Cerulean Omniview450FS orientation aid, a Newton clamp, and the Lolaark Vision video amplifier.

Bluerov2 by ROV EXPERT

BlueROV2 from ROV EXPERT

The BlueROV2 from ROV EXPERT is an affordable and modular Mini ROV. It features an HD camera and live-lighting, allowing a clear view of the ocean depths. The ROV uses patented T200 thrusters in a vectored configuration, providing a high thrust-to-weight ratio and precise movement capabilities. With eight thrusters and a heavy configuration upgrade, the ROV offers full six-degree freedom of movement and feedback stability. The modular chassis design makes it easy to attach accessories such as an ROV grip clamp or scanning sonar. Technical specifications include eight modified BlueROV2 thrusters, four 1500 lumen variable lights, a 1080p low-light wide-angle camera, a 300 m depth rating, and a hand winch with 200 m of connectorized cable. PING360 Sonar PING Altimeter Acoustic Camera and Orientation Aid Cerulean Omniview450FS Newton Clamp Lolaark Vision Video Enhancement Charger and 2 x Batteries Heavy Duty Configuration

Chasing Innovation M2 Pro Max

The Chasing M2 Pro Max is a professional ROV designed for underwater inspections up to 200 meters deep. Thanks to its eight vector thrusters, it offers exceptional maneuverability, even in complex or confined environments. It is equipped with a high-definition 4K camera for sharp and precise images, as well as a powerful manipulator arm for carrying out technical interventions. Compact, robust, and easy to deploy, it meets the requirements of inspection, maintenance, and scientific research professionals.

BlueROV2 fiber optic (1.2km) from ROV EXPERT

The BlueROV2 FO from ROV Expert is a high-performance underwater ROV, equipped with a 1200m FO cable. It features a front-facing HD camera, four lights providing up to 6000 lumens, and a modular chassis for easy expansion. The ROV has eight thrusters, configurable robust settings, and is designed for professional or scientific use. The patented T200 thrusters are vector-configured, allowing for a high thrust-to-weight ratio and omnidirectional motion control; sensitivity levels range from very low speed for precise control to high power for overcoming currents or heavy loads. The manual cable reel is equipped with a connector cable, and the camera angle can be controlled to look up or down. The BlueROV2 is powered by 2x18AH batteries and can dive to a depth of 400m. Optional additions include an acoustic camera and the Cerulean Omniview450FS orientation aid, a Newton clamp, and the Lolaark Vision video amplifier.

Bluerov2 by ROV EXPERT

BlueROV2 from ROV EXPERT

The BlueROV2 from ROV EXPERT is an affordable and modular Mini ROV. It features an HD camera and live-lighting, allowing a clear view of the ocean depths. The ROV uses patented T200 thrusters in a vectored configuration, providing a high thrust-to-weight ratio and precise movement capabilities. With eight thrusters and a heavy configuration upgrade, the ROV offers full six-degree freedom of movement and feedback stability. The modular chassis design makes it easy to attach accessories such as an ROV grip clamp or scanning sonar. Technical specifications include eight modified BlueROV2 thrusters, four 1500 lumen variable lights, a 1080p low-light wide-angle camera, a 300 m depth rating, and a hand winch with 200 m of connectorized cable. PING360 Sonar PING Altimeter Acoustic Camera and Orientation Aid Cerulean Omniview450FS Newton Clamp Lolaark Vision Video Enhancement Charger and 2 x Batteries Heavy Duty Configuration

GPA Seabots SB100Pro USV (equipped with Impact Subsea ISA500 / Blueprint Subsea 992h)

The SB100 Pro is a remote-controlled catamaran USV used in calm waters to acquire data without an operator on board. With its open architecture and high-speed Wi-Fi communication with PCs, it easily integrates with any type of PC-controlled sensor. A ground control station allows real-time viewing and control of all integrated software functions for the sensor. The vehicle measures 100 cm x 72 cm x 47 cm, weighs 33 kg with its battery pack, has a maximum speed of 1.5 m/s and can carry a payload of 12 kg. Its 44 Ah x 12 V battery provides an autonomy of 3 to 4 hours, while obstacle avoidance is possible up to 12 m. Additional features include GPS, sonar and surveillance cameras that can reach up to 2 km using RC communication channels, telemetry and video. The SB100 Pro is programmable and comes with custom scheduling software and optional Hypack software integration.

Positioning equipment

Underwater GPS G2 system (Water Linked)

The Topside G2 is connected to the G2 antenna, which must be installed in the water with a direct line of sight to the locator. A Wi-Fi signal emitted by the Topside G2's internal web server allows the user to track the locator using the Water Linked web-based user interface. With the advantage of a built-in GPS and an Inertial Measurement Unit (IMU), the G2 GPS provides an absolute GPS position of the locator, eliminating the need to integrate additional third-party sensors for precise navigation. The G2 system is custom configured at the time of order to best meet the specific needs of the user and the target being tracked, as well as whether an operating range of 100m or 300m is required. The standard G2 system comes with a battery-powered U1 locator, allowing the G2 system to track any target (i.e. ROV or diver) and does not require locator integration, just physical attachment to the target. Key features include: - reliable position in the most challenging environments (shallow water, inside tanks/pools, around facilities, etc.) - 360-degree omnidirectional operation - reliable locator operation even when close to the surface - 100m range version - small size allowing easy mounting - user-friendly web user interface on board with full diagnostic features - Water Linked API provided to allow custom integration.

Software partners

Here's how to rent equipment from ROV Expert:

 1) Explore available rental options

2) Identify and confirm the availability of equipment that meets your needs

3) Contact ROV EXPERT with the list of equipment and the desired dates

4) Discuss rental details with the team

5) Pick up the equipment or schedule a delivery after finalizing arrangements

6) Return the equipment within the specified time frame